The BP series 3000w bypass inverter is a 2 in 1 high-quality backup power system without the charging function that expertly combines an inverter and an automatic relay (inverter bypass switch). but it has no charging function. It is suitable for off-grid solar kits or vehicle systems that do not require the grid to charge the battery but need to switch automatically. This 3000w bypass inverter can switch freely between the grid and the battery, and it only takes 11 seconds to ensure the normal operation of sensitive electronic equipment. When switching to the grid, the relay supplies the grid to the load directly, the power not via the inverter, reducing losses.
This 3000W bypass inverter also has an remote port(5525), allowing you turn on and turn off your 3000W power inverter. Click here
to check the remote panel.
3000w Bypass Inverter Pure Sine Wave Key Features:
1. Provide 12VDC/24VDC/48VDC/96VDC/110VDC/220VDC system voltage.
2. AC output support 120VAC or 230VAC and 50Hz or 60HZ.
3. 3000 watt full power long time running at a low temperature design.
4. Bypass mode Relay 30A @ >5000W load via relay.
5. DC low and over voltage protection, over-load protection, over temperature protection and short circuit indication.
6. Max 94% conversion efficiency via 48VDC system.
7. Provide grid and battery priority customize before shipping. Default is grid priority.
8. Provide remote control panel. (optional)
1. GB/T19001-2016 idt ISO9001:2015.
2. Standard high-quality components.
3. Quality inspection of the 5 processes of the assembly line.
4. PCB ultrasonic cleaning and control card Three anti-paint protection.
5. 100% full power 30 minutes and full charging aging.
6. Before packing 6 function testing, include sine wave, low/over voltage, USB charger short circuit and bypass testing.
1. Standard 3000W bypass inverter MOQ <10 units about 5-10 working days.
2. Standard 3000W bypass inverter MOQ >10 units about 15-30 working days.
3. Standard 3000W bypass inverter MOQ >100 units about 25-35 working days.
4. OEM customization consulted according to customer requirements.
1.The 3000W bypass inverter should be installed at a dry, well ventilated environment, keep the inlet more than 20CM away from the wall.
2.DC input is not reversed, otherwise the fuse blows, possible mosfet failure.
3.Short-circuit fault, Restart after removing the fault, otherwise inverter damage.
4.Non-professional please don’t open the 3000W bypass inverter, because of the high voltage inside inverter. When open by yourself without warranty.