1. Protections: Low/Over Voltage, Overload, Over Temperature, Short Circuit, Input/output Impedance
2. Battery Connection Without Sparking
3. USB Port Upgrade to 5V 2.1A
4. Support Standard MODBUS Communication
5. Battery Type AGM,GEL,Lithium
6. 300% peak power
8. Over temp up tp 90℃
2000W LCD Remote Inverter
From BPlus-2000W LCD Remote inverter，we use the design of integral radiator. As seen in picture, we change the structure and working mode of the inverter before, change the MOSFET of output to IPM module. It will enhance its reliability through it has more cost. We not only protect the IPM module in the design of the external circuit, but the IPM module itself has over-temperature, over-current, and over-voltage protection. It will be the first use in pure sine wave inverter.
Radiator has the same size of PCB board, MOSFET with faster cooling, faster heat dissipation of large area radiator, all the designs extend the service life of MOSFET, only in this way, the service life of the inverter will increase. The service life of BP series pure sine wave inverter produced by CNBOU is 8 years, BPlus series 2000W LCD Remote inverter can add to 10 years, and will be more stable.
In order to be more suitable for using in very complex environments, especially in dynamic situation such as trucks, RVs, and yacht, we make BPlus series 2000W LCD Remote inverter a comprehensive optimization.
We use the PCB to directly fix the radiator instead of simply fixing it with screens，in the whole design, more than fifteen M3 screws used to fix the PCB and components to the radiator, and fix the radiator to the base of inverter by using four screws, then fix it to the upper cover through six screws from the side. Such a solid design is just for more stable operation in a complex environment. So BPlus series 2000W LCD Remote inverter is particularly suitable for mobile use situation such as trucks, RVs, yachts, rescue vehicles, ambulances, and refrigerated vehicles.
BPlus series 2000W LCD Remote inverter use TI TMS320F28023 Micro control DSP high speed chip control. Powerful CPU could provide stable MODBUS communication, support Remote-485M at the same time to satisfy the need of remote control.
More function we can inquire：
|Wave Form||Pure sine wave|
|AC Voltage||120V (±5%) or 230v (±5%)|
|AC Output Frequency||50HZ or 60HZ ±1HZ|
|AC Regulation||THD＜2% (Linear load)|
|Battery Voltage Range||10.5V-15.5V/20.5V-31V/41V-62V|
|25% Load Efficiency||92||93.5||91|
|50% Load Efficiency||89||92.5||91|
|100% Load Efficiency||88||92||92|
|Display||Remote LCD display 30 Meters (Setup Parameters)|
|Low Voltage Alarm||10.5V||21.5V||42V|
|Low Voltage Shutdown||10V||20.5V||40V|
|Over Voltage Shutdown||15.5V||31V||61V|
|Over Load Alarm||110% 8Min/ 150% 4S/ 200% 2S/ 300% 0.1S|
|Cooling Way||Forced Air Cooling|
|Fan Working||1. Temperature over 50℃ 2. Over 75% Rated Load|
|Working Temp Range||-25℃-55℃|
|Storage Temp Range||-40℃-70℃|
|Standard||Direttiva 2014/35/UE, EN 60950-1, EN 60068-2-6|
|EMC||Direttiva 2014/30/UE, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3|
|Support||Support PC Software/Modbus|
|Rroduct Size (mm)||355*230*130|
|Packing Size (mm)||435*308*212|