change the parameter for Muse series MPPT solar charge controller by PC software( widnows 10)
Over voltage value
1.Different batteries have different over-voltage protection values. If the over-voltage values to high ,
than the battery will broken, so must select the correct battery type.
2. The Muse series MPPT solar charge controller are damaged
If theMuse series MPPT solar charge controller have damage, need remove the controller asap, because the PV voltage will direct to
battery, is very high voltage, than battery will damage.
Accessories required: tablet computer *1, RJ45 communication line *1, USB to RJ45*1
RJ45 communication line USB to RJ45
RJ45 communication line connected to the RJ45 interface RJ45 line connected to 485 interface of the Muse Mppt solar charge controller
The USB port connects to the computer(windows 10)
Open the software "CNBOU" app
Click "Open file" and select "cnbou_mbt.xls"
Select Port COM
Click "Write Target" to bring up the bar code dialog box and click skip
Popup please replace the target, operation completed, restart the controller
Now the Muse series MPPT solar charge controller finish the parameter reset.
Chinese and English interface comparison