DC or Battery input reverse solution for pure sine wave inverter B24P600-2

DC or Battery input Reverse solution for Pure sine wave inverter B24P600-2

Product and model: BP series Pure sine wave inverter/B24P600-2

Fault description:Inverter running , LED lights off . AC output no power.

Causes:DC or Battery Input Reverse

Solution and step:

1. Remove all wire from Pure sine wave inverter, include battery and AC output.

2.Clear surface dust

3.Uninstall screws from Front and rear panels

4.Open the top cover

5.Dial out the fuse

6.Check and replace bad fuses

7.Close and complete

BP series 600W vehicle inverter